Wheel spacers are suitable means of changing the physical attributes of a truck. You can use them to customize a car. You can modify the looks of a vehicle. Spacers are also used to change the wheelbase of the vehicle. With them, the wheelbase can be widened, but that will affect the appearance and functioning of the other parts of the car. Numerous kinds of materials are used for making these spacers.
Setting of wheel spacers for trucks
Installation of wheel spacers for trucks can occur in many ways. The first method involves the setting of the spacers on the hub of the wheel. The second method involves setting up the spacers on the axle with the assistance of special screws. The third way makes use of long bolts.
Different types of spacers
There are mainly two types of metal spacers. The aluminum spacers are on the lighter side, and they have anti-corrosive qualities. Comparatively, the spacers that are made of steel are stronger.
Examine the owner’s manual to find out details regarding spacing
If you decide to install wheel spacers for the truck, then you have to choose the exact fit for your vehicle that is available on customadeonly.com. What type of car spacers are appropriate for your car is the most important question that should crop into your mind. You can find out the answer from your owner’s manual. You can find everything to the minute details. You may need to see the cars with which the spacers have the same compatibility. You should also know the type of engine, type of vehicle, year of the vehicle, model of the vehicle and the brand of the car. All these kinds of information are essential before installing.
Some of the guidelines to be kept in mind while installing spacers:
According to the type of vehicle, study the owner’s manual. Remove the tires as specified in the service manual. You need to remove the retainer clips of the rotor. Another person should assist you in applying brakes. Make sure that rotor retainer does not start to spin. The utilization of impact gun is prohibited. Ensure that the lug nuts are tightly secured. You should see that the wheel studs do not extend over the new wheel. Take your vehicle outside for a drive to check that the lug nuts are properly fastened or not. If you find any disturbance, then they require being re-installed again. For a wheel to wheel spacing, utilize lug nuts to reassemble.
Installation of spacers is safe
The installation of wheel spacers causes some extra strain on the wheel bearings. It causes some stress on the individual components of the vehicle. So you have to monitor them at frequent intervals and have them replaced when the requirement arises. Wheels installed with spacers will make the steering a bit heavy. However, wheels mounted with spacers are very safe. The load is shifted from the wheel to the hub by the friction caused by the joint. As the wheel stud is not affected, it does not bend.