A wheel spacer rectifies the offset of the wheels by pushing the wheel outwards. High offset always results in the wheels resting inwards. Placing wheel spacers help in the correction of the tires. This will lead to enhancing the look of the vehicle and also helps in minimizing the damage on the suspension components that may have occurred otherwise.
Size of the wheel spacer
Choosing the size of the spacer is not an easy task. Different people will need different wheel spacers according to their requirement. Also, people need spacers for numerous reasons. For determining the size of the car wheel spacers, you have to measure the fender and tire clearance. The empty space will give you the size of the spacer. If the size exceeds the empty space, it will result in causing friction of tires. If the size is too less than the empty space, then it will not be able to meet your requirements. The size of the spacer is influenced by other factors like size of the exact wheel, suspension settings, and size of the exact tires.
Wheel spacers and wheel studs
The wheels are attached to the hub with a wheel nut or lugnut. The spacers are used to push the wheel outwards. Keep these factors in mind while choosing spacers and studs:
-Turns on the wheel nut
-Length of the stud
-Depth of the hole in the wheel
-Size of the spacer
-Thickness of brake rotor hat
Use a longer wheel stud with a thicker wheel and use a short wheel stud with a thin wheel.
Installation of car spacers
There are two types of spacers. The slide on spacers just slips on the hub and the bolt on spacers just bolt to the wheel studs of the vehicle. The tools required for installing car spacers are torque wrench, lug wrench, floor jack, jack stands, degreaser, and rags. On a flat surface, park your vehicle. Jack up the car by placing a floor jack under the car. The car should be appropriately lowered on the jack stand. Remove the lug nuts and then take the wheels out. On the studs apply some degreaser. Wipe the excess with a rag. Slide the spacer on the studs. Set it firmly against the hub. In the case of bolt on spacers, bolt the spacer to the hub. Now place the wheel so that it fits solidly against the spacer. Now fasten the lug nuts. Now lower the vehicle. Apply the lug nuts with the torque wrench. These torque nuts have to be tightened according to the manufacturer’s recommendations.
Taking the decision of installing wheel spacers
Car wheel spacers by Customadeonly helps in increasing the performance of the vehicle. The grip of the vehicle is significantly increased due to the installation of the wheel spacers. It helps in cornering the vehicles faster. The steering tends to become heavier, depending on the size of the wheel spacers. The decision of installing wheel spacers totally depends on you. If you decide to install wheel spacers, choose the right size and use the best quality wheel spacers. This will help you in smoother installation.